Ludlum Model 500 Series Pulsers

  • Pulse Rate from 1 - 9,900,000 cpm
  • 0 mV - 5 V Total Pulse Amplitude Range
  • Positive and Negative Pulse Polarity
  • High Voltage Range from 0 - 2500 Volts

Ludlum Measurements Pulser 500 series

INDICATED USE: Pulse calibration of instrumentation
PULSE RATE: Reads from 10 - 990 counts with coarse and fine tuning adjustment for accurate setting
MULTIPLIERS: X0.1, X1, X10, X100, X1k, X10k
LINEARITY: Reading within plus or minus 2% of true value
TOTAL RANGE: 1 - 9,900,000 cpm
HIGH VOLTAGE: Reads from 200 - 2500 volts (2500 plus or minus 2% megohm impedance)
METER: 2.5"(6.4cm) arc, 1 mA analog type
METER DIAL: 0 - 2.5 kV
LINEARITY: Reading within plus or minus 5% of true value
PULSE AMPLITUDE: Provides a total range from 0 mV - 5 V (positive and negative polarity)
METER: 2.5"(6.4cm) arc, 1 mA analog type
METER DIAL: 0 - 5
RANGES: 0 - 5 mV, 0 - 50 mV, 0 - 500 mV, 0 - 5 V
LINEARITY: Reading within plus or minus 10% of true value
POWER: 95 - 135 VAC (178 - 240 VAC available), 50 - 60 Hz single phase (less than 100 mA)
CONSTRUCTION: Aluminum housing with beige polyurethane enamel paint
SIZE: 8.5"(21.6cm)H X 11.5"(29.2cm)W X 9.5"(24.1cm)D
WEIGHT: 9 lbs (4.1kg)

 

MODEL
500

MODEL
500-1

MODEL
500-2

PART NUMBER

48-1677

48-1166

48-1340

HV READOUT

Analog

Digital

AMPLITUDE READOUT

Analog

Digital

PULSE FREQUENCY READOUT

Digital

PULSE WIDTH ADJUSTMENT

N/A

 

Nuclear Instrumentation

Dosimetry Shielding Sources Specials

Hepa Vacuums

Chemical Detection

Marinelli Beakers

Fume Hoods

Accessories

Emergency Response

Nuclear Medicine

Radiation Therapy Search Home

Direct Scientific  /  tel (310) 589 0601 /   Email

contact us: en espaņol, auf Deutsch
Open 8:00 AM - 5:00 PM Pacific Standard Time