|
|
|
| INDICATED USE: Hazard assessment,
emergency re- sponse DETECTORS: Internal energy-compensated GM detectors ALERT/ALARM: Indicated by annunciator on display and audible tone DISPLAY: 4 digit LCD display with 0.5"(1.3cm) high digits, separate annunciators for display units, alert, alarm, low battery, detector overload BACKLIGHT: Push-button to activate EFFECTIVE RANGE: Low 0.1mR/hr - 999.9 mR/hr High 0.1 Rhr - 999.9 R/hr HIGH VOLTAGE: Two independent controls; each adjustable from 200 - 2500 volts DISCRIMINATOR: Two independent controls; each adjustable from 2 - 100 mV OVERLOAD: Indicated by OVERLOAD on display BATTERY LIFE: Typically 200 hours with alkaline batteries (24 hours when low battery is first indicated on display) SIZE:6.5"(16.5cm)H X 3.5"(8.9cm)W X 8.5"(21.6cm)L WEIGHT: 3.5 lbs (1.6kg) including batteries RESPONSE TIME: < 4 seconds at 10 mR/hr ALARM: Flashing daylight-visible LED indication |
|
| The following
parameters are adjusted by a removable switchboard. Once initial setup and calibration have been completed the switchboard can be removed without affecting normal operation of the instrument (Model 2242 may be ordered without switchboard ) |
|
| BACKLIGHT “ON” TIME: 5, 30,
60, 90, 180, or 240 seconds for the backlight to stay “ON” when activated. RS-232 DATA DUMP MODE: Enables or disables dump mode to RS-232 port. When enabled data will be dumped every 2 seconds RS-232 DETECTOR SETUP MODE: Allows for detector parameters to be input by RS-232 port BAUD RATE: 150, 300, 600, 1200, 2400, 4800, 9600, or 19200 bps. DEAD TIME: Adjustable from 0 - 9999 µseconds CALIBRATION CONSTANT: Adjustable from 0.001 - 280 X 109 counts/display unit AUDIO DIVIDE: 1, 10, 100, or 1000 events-per-click RATEMETER ALERT/ALARM: Set at any value within the effective range of each detector LINEARITY: Reading within ±10% of true value with detector connected AUDIO: Built in unimorph speaker with ON/OFF switch (greater than 60 dB at 2 feet) CALIBRATION CONTROLS: Accessible from front of instrument (protective cover provided) RESET: Push-button to zero meter POWER: 2 each “D” cell batteries (housed in sealed compartment that is externally accessible) METER: 2.5” (6.4 cm) arc, 1 mA anlog type CONSTRUCTION: Aluminum housing with beige powder coat paint TEMPERATURE RANGE: -22 F (-30C) to 122 F (50C) HUMIDITY: Less that 10% variance in reading from 5%-95% humidity |
|
