|
|
|
|
Part Number - 48-3078 |
System Includes
|
|
| INDICATED USE: Radiation monitoring SYSTEM OPERATION: Typically located at the scale/entrance area. The system will continuously monitor incoming materials for radiation. (Alarm can be set from 2 times background to just above background) DETECTORS: 2 ea. 480 cubic inch (7866 cubic cm) shielded plastic scintillation detectors AUDIO: Unimorph type speaker (greater than 68 dB at 2 feet(61 cm)) METER: 3.5" (6.4 cm) arc, 1 mA analog type METER DIAL: 0 - 25 kcps CHECKING (green LED):Indicates vehicle is passing through the system SYSTEM OK (green LED): Indicates the system is functioning properly CHANNEL 1: Pushbutton to check the count rate on channel 1 CHANNEL 2: Pushbutton to check the count rate on channel 2 ALARM: Indicated by a red LED's, red flashing lamp, and audible tone (Can be internally set from 4 - 34 deviations above background in increments of 2 ) Note: A deviation setting of 30 is approximately equivalent to 2 times background. AUDIO ACKNOWLEDGE: Push-button to silence the audio after an alarm has been indicated ALARM RESET: Push-button to reset the alarm FAIL 1 (yellow LED): Indicates when a signal is not received from detector 1 FAIL 2 (yellow LED): Indicates when a signal is not received from detector 2 RS-232: 9 pin connector to allow connection of a computer or printer for data logging. CONTROLS: 5 pin connector allowing for connection of external alarm indicators RELAYS: 3 pin connector allowing for connection of external alarm indicators POWER: 95 - 135 VAC (178 - 240 VAC available), 50 - 60 Hz single phase (less than 100 mA) ELECTRONICS CONSTRUCTION:Steel NEMA 12 enclosure TEMPERATURE RANGE: -20 degrees F(-29 degrees C) to 140 degrees F(60 degrees C) SIZE:(Electronics) 15" (38.1 cm)H X 12" (30.5 cm)W X 6.5" (16.5 cm)D (Detectors) 72"(183 cm)H X 8"(20.3cm)Diameter WEIGHT:(Electronics) 18 lbs (8.2 kg) (Detectors) 65 lbs(30 kg) each SHIPPING WEIGHT: 200 lbs (91 kg) shipped via UPS in 3 boxes |
|
|
|
|
