PD-10i Electronic dosimeter

The PD-10i Electronic Dosimeter is simple and precise. This electronic dosimeter provides push button controls on the front which allows the user to adjust alarm set points and chirp increments. In addition, numerous dosimeter functions can be enabled or disabled to suit your personal needs. This feature eliminates the need for a computer reader interface when versatility and low systems cost are a primary concern. The liquid crystal display on the dosimeter steps through total dose, dose rate, stay-time and set point confirmation displays. The PD-10i is operational as a stand alone dosimeter. ON/OFF function is push button controller. For a bargain on used dosimeters, see our SAIC PD-1 Electronic Dosimeters, Pre-owned for $295.

PD-3i Electronic dosimeter
Widely used in the nuclear industry for simple operation. Offers preset (factory or your reader) alarm set points and chirp increments to your special requirements. Simple ON and OFF by removing battery or with optional switch (DSPD-3i-S). Simpler to use than the 10i.
	The PD-3i accurately records dose information from 0 mR to 999R and has a dose rate range of 0 mR to 500 R/h with no fold-over up to 1000 R/h. These dosimeters operate from any AA format battery, any chemistry, including standard 1.5 volt alkaline batteries. The PD-3i will run for more than 2,000 hours on a single alkaline battery. The Liquid Crystal Display on the dosimeter steps through Total Dose, Dose Rate, Stay-Time, and Set-Point Confirmation displays. The PD-3i is operational as a stand alone dosimeter or it can be used with other dosimetry products.  DSPD-3i or 3i-S Dosimeter $429