The RADOS RAD-60 (also known as the Doseguard) electronic alarming dosimeter is a precise and reliable instrument for ensuring personal safety. Ideally, the RAD-60 (Doseguard) is used in everyday radiation monitoring, in stand-alone conditions. If your needs grow for a more sophisticated system, the versatile RAD-60 can also be integrated into an Access Control System. The RAD-60 can be switched into System Mode, for the purpose of tracking Personnel Dose records and generating compliance reports.
The RADOS RAD-60 is manufactured in Finland and includes state-of-the-art technology with built in memory for retrieving dose, even during power-down. It eliminates outside interference from shock and RF. The RAD-60 is easily programmed by the user, includes a digital display, and operates with a single AAA alkaline battery.
| RADOS RAD-60 Electronic Dosimeter | $445 each |
For bargains on used stock, see our SAIC PD-1 Electronic Dosimeters.
With Touch of a button, the user can:
Specifications
Detector:
Energy compensated Si-Diode
Front panel push button functions: change display priority (dose/dose rate), power ON/OFF, chirp ON/OFF, reset integrated dose, change alarm thresholds, activate battery test
Measurement Range:
Dose: 1 uSv - 9.99 Sv or 0.1 mrem - 999 rem
Energy Response: Hp(10), 60 keV - 3 MeV, better than + or - 25%, up to 6 MeV,
better than + or - 35%
Dose Rate: 5 uSv/h - 3 Sv/h or 0.5 mrem/h - 300 rem/h
Dose Rate Linearity: Better than + or - 15% up to 3 Sv/h (300 rem/h)
Calibration:
Better than + or -5% (Cs-137, 662 keV at 2 mSv/h), Hp(10)
Audible Alarms: Seven separate alarms, sound level typically better than 85
dBA at 30 cm
integrated dose:
dose rate,
dose overflow,
dose rate overflow at 3 Sv/h or 300 rem/h,
low battery 1 and 2,
defect
Alarm Thresholds: Six preset values each for integrated dose and dose rate-push
button selection
Connectors: Infrared communication via bottom of the dosimeter
Power Requirements: One triple A alkaline cell, typical life is 1800 hours in
background (dose mode)
Temperature Range: -20 - + 50° C operational, humidity up to 90% RH,
non-condensed -20 - + 70° C storing
Weight: 80 g (including battery)
Size: 78 x 67 x 22 mm
Options: ADR-1 Configuration Kit , RAD-60 Carrying Cases and The ACS
Express Software - ACS Express is a state-of-the-art Windows-based
Access Control System providing logging and personnel control for
restricted area entries and exits. Designed exclusively for use by
Emergency Responders. Load the software on a laptop, hook up an ADR-1
Reader and your ready to implement the system in minutes. Provides
dose records and ingress/egress controls to track personnel in
radiation areas.