SE International Inspector - Pancake Survey Meter and Scaler

The INSPECTOR radiation survey meter has an internal GM detector and is microprocessor controlled. The Inspector Survey Meter is a general purpose instrument for low levels of alpha, beta, gamma and x-rays. The digital readout, red count light and audible beep, provide instant indications of the radiation level. Other benefits include scaler function, an adjustable timer and external calibration controls. 

General Use includes: Emergency response personnel, Laboratory technician, Industrial, X-ray technician, Radiographer, Industrial hygienist,  Safety manager, Equipment service & maintenance technician, Radiation safety officer, General public, and Geologist.

Common Applications include: Gross wipe counting, Surveying for NORM* contamination,  contamination surveys of packages, equipment, people, etc., regulatory inspections, low energy radionuclide detection * Naturally Occurring Radioactive Material

Click here for external detector version of the Inspector, the Inspector EXP+

Observer Software

Detector
Inspector+ (Internal tube): 
Halogen-quenched, uncompensated GM tube with thin mica window, 1.4-2.0 mg/cm2 areal density.
Effective diameter of window is 45 mm (1.75 in.).
Radiation symbol on front label marks the center of the detector.
Display
4 digit liquid crystal display with indicators.
Averaging Periods
Display will update every 3 seconds. At low background levels, the update is the moving average for the past 30-second time period. The timed period for the moving average decreases as the radiation level increases
Operating Range
mR/hr - .001 (1µR) to 100 mR/hr
µSv/hr - .01 to 1000
CPM - 0 to 350,000
CPS - 0 to 5000
Total/ Timer - 1 to 9,999,000 counts
Accuracy
mR/hr ±10% typical (NIST), ±15% max - 0 to 100
µSv/hr ±10% typical (NIST), ±15% max - 01 - 1000
CPM ±10% typical (NIST), ±15% max - 0 to 350,000
(Referenced to Cs-137)
Alert Set Range
mR/hr .001 - 50 and CPM 1 - 160,000
Gamma Sensitivity
3500 CPM/mR/hr referenced to Cs-137. Smallest detectable level for I-125 is .02 µCi at contact.
 

Timer
Can set 1 minute sampling periods from 1 to 10 min
Count Light
Red LED flashes with each radiation event.
Audio Indicator
Internally mounted beeper (can be switched off for silent operation)
Outputs
Dual miniature jack drives CMOS or TTL devices: count to computer or datalogger. Submini jack input allows for electronic calibration
Anti-Saturation
Meter will hold at full scale in fields as high as 100 times the maximum reading.
Power Requirements
One 9-volt alkaline battery. Battery life is 2160 hours at normal background.
Temperature Range
-10ºC to 50ºC (14ºF to 122ºF)
Weight
Inspector: 301.4 grams (10.6 oz.) without battery.
Size
150 x 80 x 30 mm (5.9 x 3.3 x 1.2 in.).

Inspector

Inspector Survey Meter $560
order online
Wipe Test plate $50
order online
Instrument Stand $30
order online
Waterproof Case $120
order online
Xtreme Protective Boot $40
order online

Utility Menu

The Utility Menu offers several options accessible by holding down the + button while turning the instrument on. 3 second (fast response)

  • Switches from mR/hr and CPM to µSv/hr and CPS
  • Reset the cal factor to 100.
  • Probe adjustment settings.
  • Adjust the CAL factor.
  • Reset all setting to original factory setting (default).
    Includes
    Carrying Case, Cable for Inspector+ EXP: 42-inch Beldon 9853 with Amphenol 31226 twinax.
    CE Certification for European Sales
    Options
    Observer Software, STAND, Protective Case, and Wipe Test Plate.
    Warranty
    90 day Warranty on GM Detector, 1 year limited
    WipeTest Plate

     

    wipetest.jpg (8750 bytes)
    (patent #5,936,246)

    The stainless steel WipeTest Plate slides easily onto the Inspector+ positioning the depression and wipe directly in front of the GM tube window at a fixed distance of 1 centimeter. The WipeTest plate is removable for general surveying or decontamination. It can also be used for protecting the GM from damage and the instrument from being contaminated while the Inspector is not in use.

    Ruggedized Inspector Case


     
    click for larger picture

    Ideal for military applications, this is the ultimate case for protection from severe weather, drops, and more. Made from a nearly indestructible material, it has been designed to house your Inspector+ in a dustproof, air proof, and watertight case while still providing you with access to your Inspector+ for data, regardless of the conditions (Gamma detection only).

    Adhears to ANSI Standard (42.33) for homeland security
    Waterproof, dustproof & airtight
    Crushproof
    Adjustable Velcro hand strap - easy to use with gloves
    Inches L 8.5 - W 1.37 min (W 5.25 max) - D 2.4
    MM L 216 - W 111 min (W 133 max) - D 61
    Easily use The Inspector+ through recessed, clear plastic screen

    Manual
    S.E. International Inspector Manual in Engish

    S.E. International Inspector Manual in Spanish

    S.E. International Inspector Manual in French
     

  • Waterproof Pelican Cases Available

    Nuclear Instrumentation

    Dosimetry Shielding Sources Specials

    Hepa Vacuums

    Chemical Detection

    Marinelli Beakers

    Fume Hoods

    Accessories

    Emergency Response

    Nuclear Medicine

    Radiation Therapy Search Home

    Direct Scientific    tel (888) 368 9118 or (310) 589 0601   fax (310) 919-2981,   Email

    contact us: en español, auf Deutsch