Discontinued - replaced by the "Ranger EXP"
The Inspector EXP Radiation Detector was designed for general purpose survey of alpha, beta, gamma and x-ray. It has the same valuable features, small size, and quality of the Inspector, but features the added versatility of an external probe. The carrying case has a clear window panel providing full view of the readout, count light, and access to the switches. Convenient hand straps and a belt loop are provided for carrying the instrument. A small pocket is provided for a check source. The unique design of attaching the probe to the carrying case allows one-handed operation if desired. The protective probe cover folds easily out of the way during one-handed operation. Click here for internal detector version of the Inspector. Observer Software
Inspector EXP, external GM detector
Our Survey Meters are new and up-to date. Included is a fresh calibration and warranty. Some vendors sell older versions with expired calibration and warranty. The meters are warranted for one year and the tubes are warranted for 90 days. We provide unlimited technical assistance via phone. To whatever vendor you choose, always ask about warranty, calibration, and technical assistance. Also, tell them your application to make sure you are buying the appropriate survey meter.
Timer Can set 1 minute sampling periods from 1 to 10 min
Count Light Red LED flashes with each radiation event.
Audio Indicator Internally mounted beeper (can be switched off for silent operation)
Outputs Dual miniature jack drives CMOS or TTL devices: count to computer or datalogger. Submini jack input allows for electronic calibration
Anti-Saturation Meter will hold at full scale in fields as high as 100 times the maximum reading.
Power Requirements One 9-volt alkaline battery. Battery life is 2160 hours at normal background.
Temperature Range -10║C to 50║C (14║F to 122║F)
Weight Inspector: 880.2 grams (28.0 oz.) without battery.
Size 150 x 80 x 30 mm (5.9 x 3.3 x 1.2 in.).
The Utility Menu offers several options accessible by holding down the + button while turning the instrument on: 3 second (fast response), switches from mR/hr and CPM to ÁSv/hr and CPS, reset the cal factor to 100, probe adjustment settings, adustment of the calibration factor, reset all setting to original factory setting (default).
Includes: Carrying Case, Cable for Inspector+ EXP: 42-inch Beldon
9853 with Amphenol 31226 twinax.
Options: Observer Software, instrument stand, and Wipe Test Plate.
Warranty: 90 day Warranty on GM Detector, 1 year limited
Other SE International Survey Meters