
This four range survey meter and low energy scintillation
probe is ideal for low energy
gamma response from 15 keV to 200 keV. This low cost system is analog and manual ranging, but features quality microprocessor electronics. The GSM-115-GL is recommended for
Iodine-125 detection. The system is housed with rugged aluminum with
magnetic shielding. The BNC coaxial connector is useful for quick field replacement. Standard items provided with each system include
survey meter, probe, cable, batteries, operations and maintenance manual, and
calibration certificate
| GSM-115GL Analog Survey Meter with low energy NaI probe | $1060 |
Four Ranges: 0-.2, 0-2, 0-20, & 0-200 mR/hr or Sv Units 0-500, 0-5000 & 0-50,000, & 0-500,000 cpm
Visual: low battery and detector saturation indicators
Adjustable High Voltage: 300 - 1300 vdc ±1%
Time Response: Adjustable 4 -20 SECONDS - 90% of full scale
Power Supply: QTY 2 Nine volt alkaline batteries
Display: analog, 2.5" rugged, moisture proof panel
Dimensions: 5-½" (14 cm) H X 3" (7.5 cm) W X 7" (18 cm)
Weight: 2-1/4 lbs (1 kg)
Construction: Heavy duty cast aluminum and stainless steel
Enviornmental: stable from -20 deg C. to 60 deg. C,
moisture resistant
Energy Response: Efficient low energy gamma response from 15 keV to 200 keV. Recommended for I-125 detection.
Operating Voltage: 900 vdc
Detector Crystal: 1" x 2 mm Sodium Iodide
Window: 6 Mil Aluminum window, 42 mg/cm2
I-125 Efficiency:38% 2 PI
Background: 600cpm
Sensitive Area: 1 sq. inch (5 cm2)
Finish: Polyurethane & PVC coated aluminum
Dimensions:1-7/8" dia. X 6" long
Weight: 8 ounces
Environmental: stable from -40º C to 75ºC,
5% - 95% RH non-condensing
Construction: Rugged aluminum housing
with magnetic shielding, BNC coaxial connector for quick field
replacement.
|
Direct Scientific tel (888) 368 9118 or (310) 589 0601 fax (310) 919-2981, Email |
|
|