GSM 500DP

GSM 500DP Survey Meter with GP-1001, or GP-1002 Probes

GSM-500 Four Range Microprocessor Survey Meter with GP-1001 or GP-1002 Energy Compensated Cylinder G-M probes

This is system includes the GSM-500 Survey Meter with an energy compensated end-window G-M probe. The GSM-500 microprocessor survey meter features auto-ranging, integration and peak-hold operating modes. This system is recommended for gamma survey from 50 keV to 1.5 MeV. The probe is energy compensated from 0-200 (GP-1001) mR/hr or 0-1000 mR/hr (GP-1002).

GSM-500 Survey Meter & GP-1001 Probe. GP-1002=0-1000 mR/hr.

RANGES:0-.2, 0-2, 0-20 & 0-200 mR/hr -- 0-500, 0-5000, 0-50,000 & 0-500,000 cpm

Separate controls for each range

PANEL CONTROLS:OFF - MEASURE, INTEGRATE & PEAK HOLD - CPM OR DOSE-SPEAKER

METER INSTANT ZERO

PANEL METER:HIGH TORQUE 3.5" WITH LED INDICATORS FOR PROBE SATURATION, HV OUT OF RANGE & LOW BATTERY

CALIBRATION:CPM & DOSE - CPM DEAD TIME COMPENSATED, DOSE LINEARIZED

HIGH VOLTAGE:300 - 1300 vdc ±1% STABILITY

AUDIO OUTPUT:HIGH EFFICIENCY PIEZO ELECTRIC - WATER & SOLVENT PROOF

POWER SUPPLY:6---AA" ALKALINE

FINISH:BLUE POLYURETHANE ENAMEL

WEIGHT:;2¼ POUNDS (1 kg) INCLUDING BATTERIES- PROBE 4 ounces (.12 kg)

DIMENSIONS:5½" (14 cm) H X 4" (10 cm) W X 7" (18 cm) L ---- PROBE 1" (2.5 cm) X 6"(2.4 cm)

ENVIRONMENTAL:-30°C - 60°C ---- 5% -- 95% RH NON- CONDENSING

MEASURES ¹³⁷Cs CONTAMINATION & DOSE

MEASURES GAMMA DOSE TO 200 mR/hr - 1000 mR/hr w/GP-1002

HEAVY DUTY CAST ALUMINUM & STAINLESS STEEL

LONG LIFE HALOGEN GM DETECTOR WITH .09 WINDOW

PROBE OPERATES AT 535 vdc

NYLON COATED STAINLESS STEEL PROBE CLIP

EPOXY & PVC COATED ALUMINUM PROBE HOUSING