Moving Laser Module for Patient Alignment
Used in Radiation Therapy
Precision patient marking, planning and positioning are the key parameters for a successful treatment. Patient marking takes place during CT simulation (virtual simulation). This procedure is required for replication of treatment positioning on the LINAC. The Dorado-1 laser system consists of one ceiling rail with a fixed and a movable laser module and two Astor crosshair laser for projecting red lines to mark the patient in all three body planes.
- One ceiling rail with one movable laser for display of sagittal line and one fixed laser for display of transverse line
- Two wall/post Astor crosshair laser to display transverse and coronal lines
- Cable set consists of power cords and data cable
- Wilke Phantom for quality assurance
Dorado-1 Mounting Options
Dorado-1 Technical Data
| System | ||
|---|---|---|
| Dimensions | Wall Ceiling Post Bridge |
86 × 182 × 90 mm 1553 × 143 × 109.5 mm 225 x 1012-1512 x 167 mm 2594-5000 mm x 2300-2800 mm |
| Weight | Wall Ceiling Post Bridge |
1.4 kg 23 kg 11 kg approx. 100 kg |
| International Protection Rating | IP20 | |
| Operating temperature | 15 - 30°C | |
| Ambient conditions | 35 - 80 % relative humidity, non-condensing | |
| Travel range (ceiling) | 600 mm | |
| Travel speed (ceiling) | up to 200 mm/s | |
| Positioning accuracy | ± 0.1 mm | |
| Projection precision (ceiling) | ± 0.5 mm up to 4 m distance | |
| Laser | ||
| Laser color (typical wave length) | red (638 nm) | |
| Laser class | 2 | |
| Focusable range | 1 - 4 m | |
| Line length at 3 m distance | > 3 m | |
| Line width up to 4 m distance> | < 1 mm | |
| Maximum laser output power | < 1 mW | |
| Power Supply | ||
| External power supply | 100 - 240 V AC, 50 - 60 Hz | |
| Internal voltage | 24 V D | |
| International Certifications | ISO-9001, ISO-13485 | |
Other options:
- Support system for false ceilings
- Support system for floor mounted units
- Bridge design
Notes:
One year warranty is included, installation is not included.
